Furniture From the Utrecht Psalter - Part VII

Time flies and somehow more than five months have passed us by; it is time for the next-to-last installation of the Furniture of the Utrecht Psalter. We have now reached the letters 'S' and 'T' which are for stand and table. We have already looked at round tables, but this time we will be discussing those with  rectangular forms.

A servant returns a wine jug to a round stand next the dining table
after serving the guests in this scene from the Utrecht Psalter

This illustration is so abstract that it is
almost impossible to say what is on
the pedestal, but sculpture and artwork
would often be placed on such objects

Examples of pedestals and stands abound in medieval manuscripts and other artwork, but these mostly serve as candle or ink stands in scenes depicting the Four Evangelists. Unfortunately, like most forms of furniture from the first seven centuries of the Middle Ages, there are no surviving examples; the Utrecht, and Stuttgart Psalters, especially, inform us that there were many forms and uses for stands other than in the scriptorium. We see that, in addition to holding candles and ink, they could be used as a sideboard or serving stand, as a pedestal for a sculpture, (as they still are) and as a base to support artwork.

Essentially a stand, this "Pricina Pillar" serves
as a bowl for the holy water in a church

The forms and ornamentation for these usually followed after contemporary columns of the period and so we can draw some idea for design of them from looking at the holy water fonts in churches, such as this one from St Mary's Chapel, Marlston, a small hamlet some 40km west of where I used to live in Berkshire. It is made of stone, as are all of the others that one will find, still extant. It is probable that many such stone pedestals would have been found in the great houses, castles and palaces as well. It would also stand to reason, however, that wooden examples also existed, and would have been carved or decorated the same as the more permanent stone examples.

Bellow are some other examples from various artworks which demonstrate various forms and uses for pedestals and stands

From an 11th century book cover, in the MET, this stand
serves as a lectern

A relief sculpture in Maastrich  Cathedral, this shows
a servant tending the king; his towel is on a pedestal

From a 10th century ivory book cover
from Metz, this pedestal holds two
seated figures

From Dumbarton Oaks, this 11th century Italian ivory plaque shows a jug
supported on a tripod stand. Such a stand would clearly have been made
of wood. I saw a small example of this design, used to hold a glass, in the
Louvre, when I visited last year

Due to the somewhat loose execution of many medieval artworks, it is sometimes
 difficult to discern if an object was intended to represent a stand with a level top,
or a sloped surface, as one finds on a lectern. In the case with this sculpture,
however, there can be no ambiguity of the artists intention; he depicted both.
This is part of a beautiful late 12th century tympanum on the cloister church
of St Benoit Sur Loire, (Flurey) in France.

There are 13 of these pedestals or stands depicted in the Utrecht manuscript, each of them different from the others, but none of them, as with all of the other furniture illustrated, has any particularly well defined details.

Similarly, there are also seven tables, shown to have a rectangular form, (but usually not having much more detail than that.) All of them have legs on each of the table's four corners; two of them have the addition of a lower stretcher rail in the manner we are familiar with from tables of the 16th and 17th centuries. 

A rectangular table with a lower stretcher connecting the four legs

Another table, a thousand years newer, (but which most people would consider
very old) showing the same basic design

This mosaic from Ravena shows, again, the same basic table design; this
one was three hundred years old at the time of the Utrecht Psalter. 
It seems that this table design had staying power.

There are several factors which make it very difficult to trace the stylistic trends of tables over the course of the Middle Ages. First, as already stated, there are no examples of any table before the 12th century, and very few from before the 16th. Artists used what they wished, to portray the message they intended to convey,but  this is not always the same as depicting stylistic development and trends. One medieval trend, in fact, was to depict tables with no legs at all. This puts an huge gap in what could be a more informed segment of design history, but because from at least the 9th century, into the 13th, most tables are depicted as a flat or moulded plane with an elaborately draped table cloth, which seems to float in space having no legs at all, we are left to ponder what sorts of supports these tables had.

An ivory fragment from an 11th century box, which shows the typical trend
of portraying a table with no legs. This table does seem to show a moulded
frame around the perimeter. (from the Archaeological Museum, Madrid) 

Much is made of the so-called trestle table, and the table set upon donkeys or horses (depending on where your English comes from), which are supposed to have been so common in the medieval period. From the artwork, there is nothing to support the idea that these were the most prolific forms of tables. In fact, the earliest depiction I have found, to date, clearly showing such a medieval table comes from the 13th century. However, there is a Roman sculpture which shows such a table, so, like many other pre-medieval inventions, they must have continued on, un-portrayed in the artwork, all through the "dark ages", until they reemerged at the end, at which time there was a more prolific campaign of illustrating ordinary objects, and we again find them depicted. In other words, just because no one illustrated one, or more precisely, no illustration of one survives, we cannot say that they did not exist. There are dozens of tools (jeweler's tools, and vices for example) and objects which we have no illustrations of, but deductive reasoning tells us that they were there.

3rd century Roman depiction of a flower and vegetable vendor
His table is the familiar "A-frame" table of the late Middle Ages...

...Very much like this table, but without the Gothic ornament.

There is no such table portrayed in the Utrecht Psalter; the other rectangular tables (four of them) simply have four posts at the corners, and one more has cross stretchers at the ends, but no lateral braces.

A table with end stretchers but none running length-wise

A rare example of a table actually depicted with its legs. This one from the
middle of the 12th century and found in BSB Clm 2929

It is a shame that almost no early medieval furniture still exists, and therefore we have no real idea of what a 9th, 10th, or 12th century table would have actually looked like. We can, by studying the artwork however, at least see that our pre-conceived ideas are generally flawed. (I read a "history of medieval furniture" which stated that "early" [in that authors vocabulary, meaning pre-14th century] days, tables were simply "rough planks placed upon tree-trunks".) Even if the manuscripts present no life-like depiction of a table, we may still be able to realise that there were many forms and styles of tables, just as there are now. When we combine that with the knowledge that all objects were decorated and ornamented according to the the station of the person possessing them, and followed stylistic trends, we can begin to gain some insight into the potential appearance of medieval tables as they may have been.

Videre Scire

The Utrecht Psalter; Part VI

It has been awhile since we had a visit with the Utrecht Psalter, so I thought it was about time for the next installment in this series. This week's post brings us to the letter 'R' which is for Round Table. I did not do 'T' for table, because there are two types of tables and I wanted to cover each one of them separately.

Round Table from the 9th century Utrecht Psalter

I have counted 22 individual round tables in this Psalter, and they can be subdivided into three subcategories. The first are three tables which have been depicted with no visible legs of any sort. When this practice first began is not known to me, but there is a 3rd century BC painted Greek vase in the MET which has a scene with a table completely covered in a white cloth, leaving no visible legs to support it. This became an exasperating (for someone interested in furniture design history) trend in the 11th and 12th centuries, to the point that it is hard to find any depictions of tables from that era actually illustrating the legs. They are almost always shown as a top with an elaborately draped covering cloth, seemingly floating in space, as if by magic. (This is simply another example of trends in illustrated fashion, much like the overly elongated legs of female models in fashion illustrations of the mid 20th century, meant to exemplify an illusionary ideal.)

This represents a round table, but there are no details, to indicate anything
about construction details or ornamental decoration.

A round top table, again with no support depicted, but showing the fashion
for covering the table with an elaborate drapery.
This illustration comes from a 9th century book cover in the BNF.

Coming back to our 9th century Psalter, it is interesting to note that none of these tables are shown with a cloth covering. This should not be interpreted to mean that people did not cover their tables with cloths at this time, several 9th century ivory carvings show tables draped with cloth, completely obscuring the details of construction, just as with the 11th and 12th century trend that I mentioned. (see above) There was a lot of regional and artistic variation, and anything one sees in medieval illustrations should not necessarily be applied to the whole of Europe. In fact there is so little left to study, from the first two thirds of the Middle Ages, that any glimpses we see are like trying to watch a football match standing 2 metres behind a picket fence. Those glimpses, however, are enough to wet the apatite, and give people such as myself, reason to try to keep watching in hopes of seeing something fascinating.

There still exists one other very well illustrated 9th century Psalter, known as the Stuttgart Psalter, which could not be more different from the Utrecht Psalter. None of its illustration bear any resemblance to either the images used, or the driving concepts behind their inclusion in the manuscript. This shows us the wide range of style, and the variation which existed throughout Europe during the 9th century. (and nothing changed, on that note, for the rest of the medieval period) Of interest, insofar as this discussion is concerned, on that point, is the fact that whilst the Utrecht Psalter has no fewer than 29 tables depicted, (among more than 200 illustrations) the Stuttgart Psalter only has one, from more than 300 illustrations.

From our manuscript we find that the second sub-type of round table depicted is one with straight legs; there is only one such example of this type however. Since these illustrations are merely sketches, with almost no details, it is impossible to say whether the artist was intending square or turned legs, but they do seem to have a bit of taper to them. The truly unusual detail, however, is that unlike all of the other round tables depicted with legs, this one has four legs, whereas the others all have three. Given the level of detail in this manuscript, this table is no different from a dining table that might have been made in the 17th 18th or 19th century. There are a scattering of other medieval illustrations of round, four legged tables from the various centuries, and we can probably safely conclude that such tables existed, in the guise of the ever changing period decorations, right through the medieval period.

A four legged round top table. Would these legs be turned? It is hard to say.
This illustration does seem to suggest that the legs are applied to the outside
perimeter of the top (as apposed to being mounted underneath)

The third, and by far most common form of round table depicted in this Psalter, is a type carried over from Greco-roman times; this is a tripod table with lion mask and paw feet. There are 18 such tables in this manuscript, which probably doubles the number of extant illustrated examples from the whole of the 9th century. One example was given at the top of this article and another is pictured below. Both are of the same type, but this second illustration suggests that such tables could be made quite large to allow many guests to be seated, calling to mind the Arthurian legend of the "Knights of the Round Table".

A round tripod table large enough to seat many people, yet still made in
the same style as the smaller ones.

Anyone paying attention will note that all three legs seem to be on the same side, but this is a stylistic representation, and has a tradition probably as old as the actual design of this type of table, a point illustrated by the following 5th century BC Etruscan representation of one of these tables.

When I was in MET I spent time searching for origins of medieval furniture
design, this 5th century BC Etruscan table tells us that when the 9th century
Utrecht Psalter was illustrated, this table design had already been around for
more than 1300 years.

When one speaks of "the Middle Ages" most people will conjure up some mental image of what that means to them; inevitably, this image will have much more of a resemblance to life in the 13th, 14th or 15th centuries, than to earlier periods. The fact is, that styles and tastes evolved over the course of history, and by the time the 13th century came around, there was very little which resembled life of the 8th or 9th centuries, much as 1970 had very little to do with 1920. In a broader sense, the "medieval" world of the 9th century bore much more of a resemblance to the Roman period (at least in regions once included in the Roman Empire) than it did to the "Middle Ages" of the 14th century. The following six illustrations will quickly point this out.

Roman town, from a Pompeian Mural in the MET 

9th century depiction of a town, from an ivory panel in the V&A

Roman Soldiers from Trajan's Column

9th Century mounted soldiers from a mid 9th century Psalter,
St Gall, Switzerland
The helmets are still very much the same, as is the length and form of
the clothing, one change which has occurred is the more prevalent use of
chain mail armour.  

Another of the 18 round tables from the Utrecht Psalter. This one is of a
smaller personal size, such as the following charred remnant found in
Herculaneum, buried in the 79 AD eruption of Mt Vesuvius

A very rare survivor (almost a survivor) this is the charred remains of a
Roman era table, very much like those illustrated in the
Utrecht Psalter

I have read so many references to medieval tables being "planks set on top" of "crude" trestles, or "tree trunks" that it makes me want to scream. The medieval artwork tells a very different tale to that notion. It is also interesting to note that the earliest example I have found to date, of a "trestle table" is from the 13th century. This is not to say that they did not exist before that time, but most pre 13th century depictions of tables are round, demilune, or rectangular on turned or square legs, with an occasional 'X' frame or pedestal base to round out the selection. Most early illustrations of tables clearly indicate some form of decoration to the supporting members, wherever any support is actually indicated.

In centres of commerce and industry and places of education, where society continued to thrive, the Roman style of art melted away much more slowly. In Aachen, the capitol of the Carolingian realm, we find a pair of lion masks on the cathedral doors (I believe these are actually cast copies made from the originals) which were made in the 9th century, Here we still see a lot of classical influence on the design, including the panel construction of the doors, the egg and dart moulding, the acanthus leaf wreaths, and the lion faces, (they originally held rings, used to pull the doors closed), but we can also see that the changes of artistic trends have left their own period stamp on them.

One could easily imagine these lion's faces carved on the terminals of
lion-paw legs and then we would have a 9th century version of
this sort of table

A 1st Century AD table from Pompeii, This is another example
of a Roman table, but in principle it is much the same as those
illustrated in the manuscript. To get a 9th century version, we
need to add 9th century style lions, such as those pictured
in the previous illustration

To sum things up, there is so little of anything left from the early medieval period that it is impossible to recreate that world, but little hints and fragments, and a bit of logical deductive reasoning can fill in a bit more of the void left by the destruction of so much of what once was. This Utrecht Psalter gives us some tantalising glimpses, and informs us that certain stylistic trends, such as lion shaped tripod tables were very slow in dying out and continued into the 9th century

Last minute addition, just in case someone gets the idea that the tables
depicted in the Utrecht Psalter are an anomaly. This is from a manuscript
known as the Drogo Sacramentary, which is found in the BNF and was
created in the middle of the 9th century.
(BNF Lat. 9428)

.

Videre Scire

Table, Part X; Finished (Mostly)

It has quite some time since I posted anything about this table, and people have been asking me when it would be finished. It was actually done in August, but the clients were out of the country at the time. Basically, their schedule and mine did not agree for an earlier delivery time. I did deliver it a few weeks ago, but forgot to take my camera with me. These pictures were kindly taken and sent to me by the client. I just wanted to share them for anyone hoping to see the end of this project.

In this picture it is plain to see the reason for the table's unusual shape

A view of one of the feet

Another view

In the title of this blog I said that the table was "mostly" finished;
That is because the chairs for this table are not of a conventional
height and the table must be raised 50mm. I will make some additional
feet to attach to the underside of these bases. 

This weekend I am exhibiting at a trade show in York Pennsylvania, and will be posting about that next week.

Table Progress - Part IX

The table is finally nearing completion. On the third of August the clients will be coming by to make a final approval of everything before I do the finishing. There are still a few loose ends, such as the iron bits that are not all finished, but here is the next to last post on the topic. The next time this table is featured will be when it is ready for delivery. This week we will go into detail about the table leaves and the slide mechanism, as well as a bit of discussion on draw-top tables in general.

One of these days it will actually be finished

I had some pictures of how I made the structural members for the apron, but they were lost when my memory card gave out. Once the supporting sections were completed I began working out the slide mechanism. On a draw top table, the principle is that the slides run under the top and are connected to the leaves. These guide rails are generally long enough that the weight of the top is able to support the the leaf. One drawback to that method is that if someone presses to hard on the extended leaf it will lift up the main section of the top.

When I was a kid we had a huge draw-top dining table and I remember a couple of unpleasant accidents caused by someone attempting to push themselves up from their chair by pressing down on the extended leaf. Not a pretty picture. To prevent this from happening, and because my guide rails are not long enough anyway, I will be using an iron cross-tie  which will prevent the leaves from being pressed down. In this series of photographs that has not been installed yet, however.

Setting out the slot for the guide rails

Cutting said slots

One down...the other three are already gone

The slots in which the guide rails will run also serve as a track for the rails to run in, therefore they had to be cut precisely.

Of course the ends of the guide rails cannot just be square

Cutting out a decorative end

In a situation like this, it is much faster to make a couple of straight down cuts and then use a chisel to finish up the shaping.

And of course they cannot be without a little extra ornament made
with a carving gouge as well

Trimming the ends of the leaves

I opted to use straight timber which had some curve to the grain and cut the curve in the stock, as opposed to bending these short segments. As it turned out, I should have used one piece, steam bent it, and then cut it into segments as needed. It was a bit of a challenge to get the inside curves to meet up without a gap. I did manage, but I think it would have been much faster with bent timber. I deliberately left the end wide so that I could place the finished leaves under the top and trace the outline. Once it had been traced, I cut the waste material off and planed the edge smooth. (I used a spokeshave for the inside curves.)

When you cut from one direction and then turn around and come back to
the place where you stopped you will be able to see if your cut is
running square 

Using a cabinet scraper to do the final smoothing

I love cabinet scrapers, and have no idea why anyone would want to sand instead. In addition to getting a nicer surface, the scraper is one hand tool that actually takes less time than the a machine. It took me less than a minute to get this little pile of fluffy shavings, but to remove the same material with a sander would take at least 20 minutes; not to mention that one would have to change grit 3 or 4 times.

Guide rails in guide ways

The table; ready to receive the main section of the top
The contraption on the end is to prevent the leaf from falling. 

It looks good; it feels good to be at this point as well

Top with leaves extended

One of the things I like to do with draw top tables is to put a little bead moulding between the two sections of the top. This helps to disguise the line between the lower and upper parts. The way I do it is to make the top thicker than the leaves, and then use a scratch stock to add the bead to the bottom edge. The lower leaf is the thickness of the top, less the bead. In order for the table to have a uniform surface when the leaves are extended, however, spacers must be added between the leaves and the guide rails. In this picture, I have not yet put the spacers, thus the leaves are currently lower than the top.

I had hoped to install this iron brace today, but spent the whole day getting the leaves and guides set up. I lost count of how many times I took the top off and then put it back on, but it was many.

One of the two braces which a blacksmith and I made this past week at his
little forge. That was a lot of fun, so much so that I did not get any pictures.
I got to play at being a blacksmith myself.